Bi-telescopic boom articulated aerial platform 37DJ ForSte
MAX BASKET FLOOR HEIGHT
37,3 m
TURRET ROTATION
360º
OUTRIGGERS
H + H
BASKET FLOOR HEIGHT
35,3 m
BASKET DIMENSIONS
2,0 x 0,8 x 1,1 m
CONTROLS
Hydraulic
MAX OUTREACH
21,0 m
CESTA
Aluminum
GVW
18.000 kg
BASKET PAYLOAD
300 kg
WINCH
No
Designed for demanding professionals
Main arm with articulted JIB
Robustness with great mobility
Multi-zone stabilisation system
Great side outreach
Introducing the SOCAGE 37DJ forSte Bi-telescopic boom articulated aerial platform. High quality steel frame. Above the chassis is the base that supports the structure.
Boom tower
Made of high-quality sheet steel, it consists of a folded main body and electro-welded reinforcements. It is installed on the base that supports the aerial part. The rotation of the aerial platform is guaranteed by the base set, hydraulic motor and worm screw, with a maximum of 7 turns in each direction of rotation.
Double pantograph bar group
The group allows for a reduction in the width of the installation, a distribution of stabilizing loads makes it possible to overcome obstacles between the equipment and the work area. The two articulated bars are the connecting elements between the rotating tower and the main telescopic boom.
Operational boom
Boom in tubular design, with a working area from -25° to +70° with a horizontal base. All electrical conductors and hydraulic tubes are located inside the boom, so there are no external elements that can be damaged by impacts or collisions with obstacles during the various phases of work.
Basket leveling
Mast/slave cylinder hydraulic leveling system. As requested in Standard.
Commands
Fully hydraulic controls, located on the base and in the basket, Electric hourmeter in the vehicle cabin.
Hydraulic installation power supply
Power supply with hydraulic pump coupled to the truck’s power take-off (or with an electromagnetic clutch), with control in the cabin, with a luminous LED for insertion into the appropriate box located on the vehicle’s panel. In case of lack of predisposition for the insertion of the power take-off in the vehicle, it is possible to install an autonomous group with heat engine (with gasoline or diesel power) or electric motor 230 V-50 Hz and relative hydraulic pump (according to request, it is possible to supply suitable gasoline/diesel current generator 220V-0Hz-3kW).
STANDARD EQUIPMENT
TECHNICAL CHARACTERISTICS
- Maximum working height*: 37.3 meters
- Basket base height*: 35.3 meters
- Maximum lateral reach*: 21 meters
- Tower Rotation: Continuous 360°
- Basket Capacity: 300 Kg
- Type of Basket: 2.0 x 0.8 x 1.1 meters / Aluminum
- Controls: Electric – Hydraulic
- Previous Stabilizers: HE
- Posterior stabilizers: HE
- PTB minimum: 18 T
- Color overhead: White RAL 9016 + Blue RAL 9005
(*) It depends on the vehicle where the assembly is carried out.
SECURITY DEVICES
- Acoustic beacon on the basket
- Engine start and stop command in the basket
- Electric hour meter
- Visual chassis stabilization control device
- Hydraulic system with differential filtration system in both flow directions
- Bearings that do not require lubrication
- Tubes and cables inside the arm
- Electric socket in the 110 or 220 V basket.
- Load limiter in the basket
- Dual desktop
- Magnetic rotating light bulb in the vehicle cab
- Cabin and basket anti-collision system
- Protected shut-off valve
- Signaling device connected power take-off (on vehicle dashboard)
CUSTOMIZE YOUR PLATFORM ON TRUCK
Our story began 40 years ago
